Original feeds incorrectly in scanner – Epson ES-580W Wireless Duplex Document Scanner User Manual

Page 149

149

• Check that the Wi-Fi connection is working correctly. Try turning the wireless router off and on.

• If your scanner is connected to one computer via USB and another computer via wireless connection,

pressing the

start button on the scanner will save the scanned images to the computer connected

via USB.

• Make sure another computer is not connected to the scanner using a USB cable. A USB connection

takes priority over a Wi-Fi connection. If another computer is connected by USB, disconnect it.

• If you are using a Mac computer, make sure you select the network that has priority on it.

Parent topic:

Solving Scanning Problems

Related concepts

Uninstall Your Scanner Software

Related references

Windows System Requirements
Mac System Requirements

Original Feeds Incorrectly in Scanner

If you have problems feeding originals in your scanner, try these solutions:

• If multiple pages feed at once, try the following:

• Remove the originals, fan the edges to separate the sheets, if necessary, and reload them.

• Load fewer originals at a time.

• Load only originals that meet the specifications for your scanner.

• Clean inside the scanner and replace the roller assembly kit, if necessary.

• Check the pickup rollers and clean, if necessary.

• Select

on the scanner control panel to slow down the scanning speed.

• Use

Automatic Feeding Mode

in Epson Scan 2 and scan originals one at a time.

• Use the optional carrier sheet for thin, folded, or irregularly shaped originals.

Parent topic:

Solving Scanning Problems

Related references