Wi-fi protected setup (wps) – Epson ES-580W Wireless Duplex Document Scanner User Manual

Page 67

Do one of the following:

• If the app automatically recognizes the product, follow the on-screen instructions to set up the

wireless connection.

• If the app does not automatically recognize the product, select the

icon and continue with the

next step.

On the next screen, select

Connect to a New Product

Select your product from the list.

Note:

If your product is not listed, move closer to the product and try again. If the product is still not

shown, connect your scanner to the wireless network again and then select

Connect to Existing

Product

in the Epson Smart Panel app and follow the on-screen instructions. See the link below for

wireless setup instructions.

Select

Next

to select the current wireless network.

Note:

If you want to connect the product to a different wireless network, select

Change another Wi-

Fi SSID

Enter the password for the wireless network and select

The app starts configuring the product.

Your product is now connected to a wireless network and set up for use with the Epson Smart Panel
app.

Parent topic:

Direct Wi-Fi Mode (AP Mode) Setup

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router, you can quickly connect your scanner to the
network using Wi-Fi Protected Setup (WPS).

Note:

To check if your router is WPS-enabled, look for a button labeled

WPS

on your router. If there is

no hardware button, there may be a WPS setting in the software for the device. Check your network
product documentation for details.