Spots or lines appear in all scanned images, Scanned image is cropped – Epson ES-580W Wireless Duplex Document Scanner User Manual
Page 159
159
Spots or Lines Appear in All Scanned Images
If spots or lines appear in all your scanned images, try the following solutions:
• Clean the rollers and glass scanning surfaces inside your scanner using a genuine Epson cleaning kit
or a soft, moist cloth.
• Remove any dirt from your original.
• Enable the
Detect Glass Dirt
setting in the Epson Scan 2 Utility.
Note:
If glass dirt detection does not work correctly, adjust the setting. If the glass dirt alert screen
appears after cleaning the inside of the scanner, check the glass surface again (scratches on the
glass may be detected as a glass dirt).
Parent topic:
Solving Scanned Image Quality Problems
Related tasks
Scanned Image is Cropped
If the edges of a scanned image are cropped, try the following solutions:
• Select
Auto Detect
as the Document Size setting in Epson Scan 2.
• If the document size is not detected correctly using the
Auto Detect
setting, select the size of your
original from the
Document Size
list.
Note:
If the size you want to scan is not on the list, select
Customize
to create it manually (Windows
only).
• In Epson Scan 2, select the
Main Settings
tab. Select
Document Size
>
Settings
and adjust the
cropping area shown in the
Crop Margins for Size "Auto"
setting.
• In Epson Scan 2, select the
Advanced Settings
tab. Make sure the
Edge Fill
setting is set to
None
.
Parent topic:
Solving Scanned Image Quality Problems
Related tasks