Projecting images – Sony BRAVIA XR A95K 55" 4K HDR Smart QD-OLED TV User Manual
Page 42
Data Projector
VPL-GTZ380
Projecting Images
Select an input device to project an image.
Turning Off the Power
Note
Never disconnect the AC power cord while the projector is turned on.
Hint
When [Status] is set to [Off] in the
[Setup] menu, the input selection window does not appear. Pressing the INPUT button
switches input terminals sequentially.
Related Topic
Operation With the Remote Control RM-PJ24
5-023-481-14(1) Copyright 2020 Sony Corporation
Turn on the projector and the connected device.
1
Press the INPUT button.
The input selection window appears.
2
Press the INPUT button repeatedly to select the device from which you want to display images.
You can also select the desired device by pressing the
/
(Up/Down) button and the ENTER button.
You can change the input terminal with the A to E buttons on the remote control.
3
Press the /
(On/Standby) button twice on the control panel or press the
(Standby) button once on the remote
control.
Shutdown is started, then the projector is turned off.
1.
Unplug the AC power cord from the wall outlet.
2.
42