Setting crestron connected – Sony BRAVIA XR A95K 55" 4K HDR Smart QD-OLED TV User Manual

Page 119

Data Projector

VPL-GTZ380

Setting Crestron Connected

You can change the control protocol settings of Crestron Connected on the [Crestron Connected] page in [Advanced
Settings].

Note

The entered value will not be applied until the [Apply] button is clicked.

Settings

[Start Crestron Service]

Turn Crestron Service on or off. For details, refer to the Crestron Corporation product catalog and so on.

[IP Address]

Enter the IP address of the Crestron system server.

[IP ID(HEX)]

Enter the IP ID(HEX) of the CIP protocol.

[Port No.]

Enter the CIP protocol server port number. The factory default setting is “41794.”

Select [Advanced Settings] - [Crestron Connected] and display the [Crestron Connected] page.

Set each item and click the [Apply] button.

119