Sony BRAVIA XR A95K 55" 4K HDR Smart QD-OLED TV - Manual (Page 118)

[Community Name]: Enter the community name for SNMP.
[Rights]: Set the access rights to the management information base (MIB).
[Trap destination address list]: Set the destination address for traps. Select the Add button to add the IP address to
Trap destinations.
After editing, select the OK button in Add edits to community list to add these contents to the community list.
[Send Authentication Trap]
Set to on to send a trap message when an authentication failure is detected.
[Accept SNMP packets from these hosts]
Set to on to restrict the reception of SNMP packets only from the hosts registered in the Host address list.
[Host address list]
Set the IP address of the host that receives SNMP packets. Select the Add button to add the IP address to Host address
list. For security purposes, we recommend entering an IP address to restrict access.
5-023-481-14(1) Copyright 2020 Sony Corporation
118