Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) User Manual
Page 86
Linear PCM Recorder
PCM-A10
Adjusting the playback speed – the DPC (Digital Pitch Control) function
You can adjust the playback speed in a range from 0.25 times to 3.00 times. Changing the playback speed does not
affect the playback audio. Files will play in natural tones, thanks to digital processing.
You can also change the playback speed while your linear PCM recorder is in the transcription playback mode.
Hint
To resume the normal playback speed, select [OFF] in step 3.
You can select the playback speed as follows:
1.00 times - 0.25 times: FLAC files with the sampling frequency at 88.2 kHz or higher
2.00 times - 0.25 times: FLAC files with the sampling frequency below 88.2 kHz, LPCM files with the sampling frequency at
88.2 kHz or higher
While playback is on standby or in progress, press
DPC (Digital Pitch Control).
The DPC setting screen is displayed.
1
Press
or
to adjust the playback speed.
The speed decreases by 0.05 times (from x 0.25 to x 1.00).
The speed increases by 0.10 times (from x 1.00 to x 3.00).
The playback speed is set to [x 1.00] by default.
2
Press
or
to select [ON].
3
Press
.
4
86