Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) - Manual (Page 254)

Help Guide
Linear PCM Recorder
PCM-A10
List of messages
HOLD... Slide HOLD Switch to Activate.
All the buttons are disabled because your linear PCM recorder is in the HOLD state to prevent unintentional operations.
Slide the HOLD•POWER switch to the center dot to release the linear PCM recorder from the HOLD state.
(See
Releasing the linear PCM recorder from the HOLD state .)
Low Battery Level
You cannot format the memory or delete all the files in a folder because of insufficient battery power. Charge the built-in
rechargeable battery of your linear PCM recorder.
(See
Charging the battery with a computer .)
Charge Battery
The battery is worn out. Charge the built-in rechargeable battery of your linear PCM recorder.
(See
Charging the battery with a computer .)
SD Card Error
An error was detected when you inserted a microSD card into the microSD card slot. Remove the microSD card and
insert it once again. If this message keeps appearing, use a new microSD card.
Memory Full
The remaining capacity of the built-in memory is insufficient. Delete some files and repeat the recording once again.
(See
Deleting a file .)
File Full
The sum of folders and files or the total number of files has reached the limit. You cannot create any more files. Delete
some files and create the file once again.
(See
Deleting a file .)
Settings are Full
The folder name you selected is already used. Change the folder name.
(See
Changing a folder name .)
Track Marks are Full
The number of track marks has reached the limit. You cannot add any more track marks. Delete some unnecessary track
marks.
(See
Deleting a track mark .)
Built-In Memory Needs to be Formatted / SD Card Needs to be Formatted
The built-in memory or the microSD card has been formatted by a computer. Your linear PCM recorder cannot create
the required management file for operations. Make sure that you use the linear PCM recorder, not a computer, to
format the built-in memory or the microSD card.
(See
Formatting the memory (Format Built-In Memory/Format SD Card) .)
The built-in memory or the microSD card does not contain the REC_FILE folder. Formatting the built-in memory or
the microSD card automatically creates the REC_FILE folder.
(See
Formatting the memory (Format Built-In Memory/Format SD Card) .)
Process Error
254