Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) - Manual (Page 45)

Note
During manual recording, the VOR function does not work.
Hint
Press or to select the optimum recording volume level for the sound source.
You can check the current recording volume level on the peak level meters. Adjust the recording volume so that the
recording volume level stays around -12 dB, which fits within the optimum range (
).
If too loud sounds are detected during recording, [OVER] ( ) appears on the display window and the peak
indicator ( ) lights. In such a case, turn down the recording volume by pressing until [OVER] disappears and
the peak indicator goes out to avoid sound distortion.
If you can check the recording volume in advance, it will be easier to use the Rehearsal function for adjusting the
recording volume level.
6
Press REC/PAUSE.
appears on the display window to indicate that recording has started, and the recording indicator ( ) lights in
red.
7
To stop recording, press STOP.
[Saving...] and then the recording standby screen appear.
Now you can press
to play the file you have just recorded.
8
45