Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) User Manual

Page 101

While a Bluetooth connection is established, no audio is output to the headphones connected to the

(headphones) jack

on the linear PCM recorder.
To use the connected headphones for listening, disconnect the Bluetooth connection.

Note

The device registration (pairing) information is cleared in the following cases. You need to register (pair) the device with your
linear PCM recorder once again.

The settings on either or both devices are reset to the default settings, for example, due to initialization.

The device registration (pairing) information is deleted, for example, during the course of a repair service.

If the device registration (pairing) is deleted from the linear PCM but the Bluetooth audio device still has the device registration
(pairing) information of the linear PCM recorder, delete the information and make device registration (pairing) once again.

While the Bluetooth function is turned on, the battery wears quickly to a large extent.

Depending on the Bluetooth audio device connected with your linear PCM recorder, the communication environment, or the
ambient conditions, you may hear noises or audio dropouts.

Your linear PCM recorder supports A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile)
as the Bluetooth profile. To establish a Bluetooth connection with a Bluetooth device from the linear PCM recorder, the Bluetooth
device must support A2DP. On a Bluetooth audio device that supports AVRCP, such as Bluetooth headphones, you can perform
basic operations of the linear PCM recorder.

If passkey(*) entry is prompted on the display window of your linear PCM recorder in the course of device registration (pairing),
find out the passkey for the Bluetooth audio device and enter the passkey.

You can register (pair) a single Bluetooth audio device with your linear PCM recorder at a time. To register (pair) multiple devices,
perform the above procedure from step 1 for each device.

If the Auto Power Off function is active on your linear PCM recorder, the linear PCM recorder will turn off in the specified time
period even while it is connected with a device via a Bluetooth connection. To avoid this, change the time period for the Auto
Power Off function to suit your needs.

Hint

Bluetooth wireless technology allows connection at distance of up to about 10 meters (33 feet). However, the effective range may
vary depending on obstructions (people, metals, wall, etc.) or signal status.

If the same Bluetooth audio device name is displayed multiple times, check the device that you want to register (pair) for its
Device Address. To find out the Device Address for the Bluetooth audio device, refer to the operating instructions supplied with
the device.

If the Bluetooth audio device supports the NFC function, you can register (pair) the Bluetooth audio device with the linear PCM
recorder and establish a Bluetooth connection between the devices with the one-touch operation.

You can also establish/disconnect the Bluetooth connection by selecting [

Bluetooth] - [Bluetooth ON/OFF] from the HOME

menu.

Establishing a Bluetooth connection with the one-touch operation (NFC connection)

Changing the settings of the Bluetooth function

Notes on the Bluetooth function

The passkey may also be called [passcode], [PIN code], [PIN number], or [password]. The passkey for the linear PCM recorder is [0000].
To find out the passkey for the Bluetooth audio device, refer to the operation instructions supplied with the device.

101