beautypg.com

Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) User Manual

Page 71

background image

Help Guide

Linear PCM Recorder

PCM-A10

Recording automatically in response to the input sound volume – the VOR function

You can set your linear PCM recorder to automatically start when the input sound volume reaches the predefined level,
and pause when the volume decreases below the level.

When the input sound volume decreases below the predefined level, flashing

appears and the recording pauses.

When the volume reaches the level once again, the recording restarts.

Note

The VOR function is affected by the ambient sound conditions. Select the sensitivity level of the built-in microphones suitable to
your ambient sound conditions. For instructions on selecting the sensitivity level, see

Selecting the sensitivity level of the built-in

microphones (Built-In Mic Sensitivity)

.

If the selected sensitivity level does not work as you expected or when you want make an important recording, follow the above
steps to set [VOR] to [OFF].

During manual recording or synchronized recording, the VOR function does not work.

Hint

To cancel the VOR function setup process, set [VOR] to [OFF] in step 2.

Related Topic

Recording audio from an external device with the synchronized recording function (SYNC REC)

4-740-912-31(1) Copyright 2018 Sony Corporation

While recording is on standby, in progress, or paused, select [VOR] on the OPTION menu, and then press

.

1

Press

or

to select [ON], and then press

.

[VOR] is set to [OFF] by default.

2

Press

REC/PAUSE.

appear on the display window.

3

71