If the smartphone has the nfc function, see, Nfc connection) – Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) User Manual

Page 117

Linear PCM Recorder

PCM-A10

Establishing a Bluetooth connection with the one-touch operation (NFC connection)

If a smartphone has the NFC function, follow the steps below to establish a Bluetooth connection between the
smartphone and your linear PCM recorder.

When the operation screen of REC Remote appears on the smartphone, the Bluetooth connection should be
successfully established.
Proceed to

Using the smartphone for linear PCM recorder operations

Hint

During a pairing attempt, [Bluetooth pairing request] may appear in [Notifications] on the smartphone. View the [Notifications] list
and tap [Bluetooth pairing request] and then select [Pair].

If the Bluetooth connection is not established, try the following:

Keep the smartphone touched on the

mark on your linear PCM recorder and slowly move the smartphone back and forth

and around.
If the smartphone is in a smartphone case, remove the case and perform the above steps all over again.
Check if the NFC function of your linear PCM recorder is turned on. Select [

Bluetooth] - [NFC Settings] from the HOME

menu and make sure that [ON] is selected.
If neither of the above works, try the steps in

Establishing a Bluetooth connection between the smartphone and the linear PCM

recorder

What is NFC?

NFC (Near Field Communication) is a technology that enables short-range wireless communications between various
devices, including mobile telephones and IC tags. You can exchange data by simply putting a device onto the designated
area on another device.
With an NFC-enabled smartphone, you can simply put it onto the

mark on the linear PCM recorder to establish a

Bluetooth connection by pairing both devices with the NFC function. You can also disconnect or switch the Bluetooth

Turn on your linear PCM recorder.

On the smartphone, turn on the NFC function.

Start REC Remote.

Put the smartphone onto your linear PCM recorder aligning the

marks on both devices with each other.

Keep the smartphone on the linear PCM recorder until the [Bluetooth pairing request] screen appears on the
smartphone, and then select [Pair].

117