Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) - Manual (Page 66)

Help Guide
Linear PCM Recorder
PCM-A10
Starting recording slightly in advance (PRE REC)
The Pre-recording function starts recording up to 5 seconds before you start recording. This function comes in handy
when you do not want to miss the beginning of a sudden recording event, such as an interview or an outdoor recording.
A: About 5 seconds of the ongoing audio stream is buffered.
B: Press and hold
REC/PAUSE to make the recorder pause for recording.
C: Press REC/PAUSE.
D: Recording start.
While recording is on standby, select [PRE REC] on the OPTION menu, and then press . 1
Press or to select [ON], and then press .
[PRE REC] is set to [OFF] by default.
2
Select the memory storage (the built-in memory or the SD card) and the storage folder where you want to
store recorded files. 3
Press and hold REC/PAUSE.
Your linear PCM recorder pauses for recording and up to 5 seconds of the ongoing audio stream is buffered in the
recorder's memory.
(
indicates the buffered time length.)
4
To start regular recording, press REC/PAUSE.
Regular recording starts with the audio stream buffered in step 4 prefixed.
5
To stop recording, press STOP. 6
66