Help guide – Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) User Manual
Page 64
Linear PCM Recorder
PCM-A10
Recording with the optimum recording volume (Rehearsal function)
If you can check the recording volume in advance, it will be easier to use the Rehearsal function for adjusting the
recording volume level.
Note
To avoid adjusting the recording volume level based on the sounds that you may accidentally make by touching the linear PCM
recorder, the recording volume level is not adjusted in the first and last 3 seconds of the Rehearsal Mode period.
Hint
If you press BACK/HOME while your linear PCM recorder is in Rehearsal Mode, it will exit Rehearsal Mode and pause for
recording.
If you press
STOP while your linear PCM recorder is in Rehearsal Mode, it will exit Rehearsal Mode and be placed on standby
for recording.
During synchronized recording, you cannot use the Rehearsal function. Turn off the synchronized recording function. For more
information about the synchronized recording function, see
Recording audio from an external device with the synchronized
While recording is on standby or your linear PCM recorder is paused for recording, press REHEARSAL on
the recorder.
[Rehearsal Mode] appears on the display window and the recording indicator flashes in red.
1
Rehearse the loudest part of a musical composition.
The recording volume level is automatically adjusted to avoid sound distortion at the loudest part.
Rehearse for about 1 minute including the loudest part.
2
Press
REC/PAUSE.
Recording starts and the recording indicator stays lit in red.
3
To stop recording, press
STOP.
4
64