Roland P-20HD Video Instant Replayer - Manual (Page 49)

49
Other Functions
Remotely Controlling the P-20HD via Network
Device
You can remotely control the P-20HD by transmitting commands to
the P-20HD from the Telnet client of a network device.
* For details on the commands used, refer to “Remote Control
Commands (LAN/RS-232)” (p. 69).
Getting ready
1 . Connect your network device to the P-20HD via the
network.
* For details on the settings to use on the P-20HD, refer to
“Configuring the Network Settings” (p. 48).
Settings on the P-20HD
2 . Press the [MENU] button Ó “LAN” Ó select “Remote
Control,” and press the [VALUE] knob.
3 . Select “On,” and press the [VALUE] knob.
This lets you transmit/receive commands to/from your network
device.
4 . Press the [MENU] button to close the menu.
Settings on the Telnet client
5 . Start the Telnet client and input the host name and
TCP port.
This connects the network device to the P-20HD.
Host name IP address of P-20HD
TCP port number 8023
6 . Transmit the user ID command for the P-20HD.
7 . Transmit the password command for the P-20HD.
8 . Transmit the version request command.
The connection is established after confirming the response
command to the P-20HD version information. Now you can
remotely control the P-20HD by transmitting commands to the
P-20HD from the Telnet client.
Exchanging Files with Your Computer via the
Network (FTP)
You can use an FTP client to connect your computer to the P-20HD
and perform the following file operations. When using an FTP
connection, the contents of the “/P-20HD_Export” folder on your SD
card or USB storage are shared.
¹ Downloading/uploading an exported (p. 43) project archive
¹ Downloading an exported (p. 42) video, EDL or FCPXML file
Getting ready
1 . Install an FTP client on your computer.
2 . Connect your computer to the P-20HD via the
network.
* For details on the settings to use on the P-20HD, refer to
“Configuring the Network Settings” (p. 48).
Settings on the P-20HD
3 . Press the [MENU] button Ó “LAN” Ó select FTP
“Directory,” and press the [VALUE] knob.
4 . Select the media you wish to access from your
computer (SD Card or USB Memory), and press the
[VALUE] knob.
5 . Select “FTP,” and press the [VALUE] knob.
6 . Select “On,” and press the [VALUE] knob.
Once you’ve done this, you can access the “/P-20HD_Export”
folder on USB storage or SD card from your computer.
Once the FTP connection is established, “Online” is shown in the
“-Status” parameter.
7 . Press the [MENU] button to close the menu.
Settings on the FTP client
8 . Launch the FTP client.
9 . In the connection dialog box, input the host name,
user name and password, and click “Connect.”
Host name IP address of P-20HD
User name User ID for the P-20HD
Password Password for the P-20HD
* The labels shown in the connection dialog box may differ with
each app.
* Disable the anonymous authentication setting, if one exists.
The connection has been established once the P-20HD’s files are
shown.