Roland P-20HD Video Instant Replayer - Manual (Page 28)

28
Pad Operations
Setting a Still Image Clip
For still image clips that are assigned to the pads, you can individually
configure the playback-related settings.
1 . Press the [STILL] button.
2 . Turn the [VALUE] knob to move the cursor and
select the still image clip.
3 . Press the [VALUE] knob.
The still image clip setting screen is displayed.
4 . Select a menu item shown below, and press the
[VALUE] knob.
Menu Explanation
Import Imports the still image.
Name Sets the name of the still image clip.
File Shows the filename (display only).
Alpha Channel
Shows whether the image has an alpha
channel (display only).
On/Off
Sets what happens when the still image
plays back.
In Transition
Sets the type of effect used when displaying
the still image.
Time
Sets the time used when the still image
plays back.
Direction
Sets the direction of motion used when the
still image plays back.
* When “In Transition” is set to “Fade,” no
effect is applied.
Out Transition
Sets the type of effect used when wiping the
still image.
Time
Sets the time used when wiping the still
image.
Direction
Sets the direction of motion used when
wiping the still image.
* When “Out Transition” is set to “Fade,” no
effect is applied.
Swap with
Swaps the position of still image clips.
1 . Select “Swap with” and press the [VALUE]
knob.
This displays the still image clip list.
2 . Select the destination, and press the
[VALUE] knob.
3 . Select “Swap,” and press the [VALUE] knob.
A confirmation message appears.
4 . Select “OK,” and press the [VALUE] knob.
This confirms the swap.
Delete Deletes the still image clip.
Color
Set the color of the label that's shown in the
still image clip.
* For details on the menu items, refer to “STILL” (p. 67).
5 . Change the value of the setting and execute the
operation.
6 . Press the [MENU] button to close the menu.