Roland DJ-505 2-Channel, 4-Deck DJ Controller for Serato DJ - Manual (Page 9)

9
Panel Descriptions
Rear Panel (Connecting Your Equipment)
To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
1 2 3 4 5
6
7 8 9 10
MIDI device
Turntable
(analog)
Turntable
(analog)
Powered speaker Powered speaker, amp
Microphone
Audio player
DJ player
1 PC port
Use the included USB cable to connect this port to your computer.
To connect this to your computer, you must install the USB driver.
& “Installing the Software” (p. 3)
Computer
2 MIDI OUT connector
This outputs MIDI messages such as MIDI clock.
3 MIC IN jack
Connect your microphone here.
MEMO
In “System Settings” (p. 22), you can specify dedicated effects (reverb,
delay) for the mic input.
4 [MIC SENS] knob
Adjusts the mic input sensitivity.
5 INPUT (CH 1, CH 2) jacks
These jacks input sound to channels 1, 2. These jacks support phono input
from MM-type cartridges.