Roland DJ-505 2-Channel, 4-Deck DJ Controller for Serato DJ - Manual (Page 6)

6
Panel Descriptions
1
2
3
4
5
6
7
8
9
10
11
12
13
9 PARAMETER area
Here you can specify the value of the parameter that’s operated by the
performance pads.
10 LOOP area
[AUTO LOOP] button
Turns auto loop on/off.
When you use the [IN]/[OUT] buttons to set the loop point, the button
automatically lights.
[SHIFT] + [AUTO LOOP] Switches the loop between active/inactive (Loop Active).
[1/2X], [2X] button
Set the loop playback length to half/double.
[SHIFT] + [1/2X]
During loop playback, moves the loop by its length toward
the left (Loop Shift).
[SHIFT] + [2X]
During loop playback, moves the loop by its length toward
the right (Loop Shift).
[IN], [OUT] button
Specify the loop-in point and loop-out point. When the loop-out point is
specified, loop playback starts.
[SHIFT] + [IN] Switches the loop slot.
[SHIFT] + [OUT]
Cancels loop playback, returns to the previously-specified
loop-in point and resumes loop playback.
11 [DECK 3], [DECK 4] buttons
Switch the deck (left: decks 1 and 3, right: decks 2 and 4) to be operated.
12 [KEY LOCK] button
Turns the key lock function on/off.
* If the key lock function is on, the pitch does not change even if you use
the tempo slider to change the playback speed.
[SHIFT] + [KEY LOCK]
Specifies the variable range of the Tempo slider.
The setting changes in the order of ±8% 0 16% 0 50%.
13 Tempo slider
Adjusts the playback speed of the song.
If the key lock function is on:
Changes the playback speed.
“–” side Lowers the playback speed.
“+” side Raises the playback speed.
If the key lock function is off:
Changes the playback speed and pitch.
“–” side Lowers the playback speed and pitch.
“+” side Raises the playback speed and pitch.
Deck Section