Roland DJ-505 2-Channel, 4-Deck DJ Controller for Serato DJ - Manual (Page 12)

12
Using Serato DJ
Playing a Song
1 Set the DJ-505’s knobs and switches as follows.
[MASTER LEVEL] knob
Turned all the way to the left
[TRIM] knobs
[HI], [MID], [LOW] knobs
Center
[FILTER] knobs
Channel faders
Lowest position
Cross fader Center
[CH 1], [Ch 2] switches “PC” position
2 Press the [ r ] button to play back the loaded song.
3 Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level in the level indicator is lit in
the orange-colored area.
4 Turn the [MASTER LEVEL] knob toward the right to adjust the
level of the speakers.
Monitoring Through Headphones
1 Set the DJ-505’s knobs as follows.
[MIXING] knob
Turned all the way to the left
[VOLUME] knob
2 Press the channel [CUE] button of the channel that you want to
monitor.
3 Turn the [VOLUME] knob toward the right to adjust the
headphone level.
Closing Serato DJ
1 Close the Serato DJ screen.
Mac OS
In the upper left of the Serato DJ screen, click the [ 6 ] (red: close) button.
Windows
In the upper right of the Serato DJ screen, click the [X] button.
A confirmation screen appears.
2 Click [Yes] to close Serato DJ.
3 Turn off the power of the equipment that’s connected to the
DJ-505.
4 Press the [POWER] switch to power-off the DJ-505.