Roland FP-E50 88-Key Portable Digital Piano - Manual (Page 63)

Editing a Scene (Scene Edit)
63 63
Assigning Functions to the Wheels
(Wheel Setting)
You can assign the functions you want to control to wheels 1 and 2.
1.
On the Scene Edit screen, use the [ дд ] [ ее ] buttons to
select “Wheel Setting” and press the [Enter] button .
The Wheel Setting screen appears.
2. Use the [ дд ] [ ее ] buttons to select the parameter, and
then use the [Dec] [Inc] buttons to change the value .
Parameter Value Explanation
Wheel Mode
Pitch Bend/
Mod.
Wheel 1 controls the pitch
bend, and wheel 2 controls the
modulation.
Assignable
The wheels respectively control the
functions assigned to each.
Wheel LED
OFF The wheel LED always stays off.
ON The wheel LED always remains lit.
Arranger Beat
Blinks in time with the beat of the
auto-accompaniment, when auto-
accompaniment is on.
The LED goes dark when auto-
accompaniment is off.
Bend Range 0–24
Sets the amount of change
(in semitones) made by the pitch
bend.
* Enabled when “Wheel Mode” is set to
“Bend/Mod Mode”.
* Enabled when “Wheel Mode” is set to
“Assignable” and when “Pitch Bend”, “Bend
Up” or “Bend Down” is selected for “Wheel
1/2 Function”.
Wheel1
Function
OFF No function set
Pitch Bend (*1) Controls the pitch bend.
Modulation
(*2)
Controls the modulation depth.
Layer (*2)
Controls the layer volume in Dual
mode.
Bass Inversion
(*4)
Switches Bass Inversion on/off.
Arranger Hold
(*4)
Switches Arranger Hold on/off.
Activity Level
(*3)
Switches the Activity Level.
Rotary Speed
(*5)
Switches between rotary speeds.
Wheel1
Part
Right & Left Upper part and lower part
Right Upper part only
Left Lower part only
Parameter Value Explanation
Wheel2
Function
OFF No function set
Bend Up Controls the pitch bend up.
Bend Down Controls the pitch bend down.
Modulation Controls the modulation depth.
Layer
Controls the layer volume in Dual
mode.
Expression Controls the expression.
Bass Inversion Switches Bass Inversion on/off.
Arranger Hold Switches Arranger Hold on/off.
Activity Level
Switches the Activity Level.
Drums Part Vol Controls the drum part volume.
Bass Part Vol
Controls the bass part volume.
Accomp Part
Vol
Controls the accompaniment part
volume.
Rotary Speed Switches between rotary speeds.
Mic FX
Formant
Controls the mic FX (effect)
formant.
Wheel2
Part
Right & Left Upper part and lower part
Right Upper part only
Left Lower part only
* 1 Changes the pitch continuously in the positive direction when bending the
wheel up, and in the negative direction when bending the wheel down .
* 2 Changes the pitch continuously in the positive direction when bending the wheel up,
and also in the positive direction when bending the wheel down .
* 3 Works as a trigger (INC when the wheel is bent up, and DEC when the wheel is bent
down) . Nothing happens when the spring-loaded wheel position returns to center .
* 4 Turns ON when the wheel is moved up from center position, and turns OFF when the
wheel is moved down from center position . Nothing happens when the spring-loaded
wheel position returns to center .
* 5 The rotary effect alternately speeds up and down, regardless of which direction the
wheel is moved . Nothing happens when the spring-loaded wheel position returns to
center .
3. If you want to save the edited settings, execute the
Write operation .
Ø “Saving a Scene (Scene Write)” (p. 27)
MEMO
If you switch to a different scene, or turn off the power after editing the
settings, the edited settings are lost . If you want to keep the data, you
must save it .