Roland FP-E50 88-Key Portable Digital Piano - Manual (Page 31)

31 31
Here’s how to configure the settings for wirelessly playing the music
data that’s playing back on your mobile device through the FP-E50’s
speakers.
* If your mobile device is already paired with the FP-E50, there is no need
to perform pairing again. Refer to “Connecting an Already-paired Mobile
Device” (p. 31)
Making Initial Settings (Pairing)
As an example, we explain how to make settings for an iPad. If you’re
using an Android device, refer to the owner’s manual of the mobile
device you’re using.
1.
Place the mobile device that you want to connect near
the FP-E50 .
2.
Long-press the [Menu] button .
“Now Pairing...” appears.
MEMO
You can start pairing by navigating as follows: [Menu] Ó “Bluetooth” Ó
“Bluetooth Pairing” Ó [Enter] .
3. Turn on the Bluetooth function of the mobile device .
4.
Tap “FP-E50 Audio” that is shown in the Bluetooth
device screen of your mobile device .
The FP-E50 and mobile device are paired. When pairing is completed, a
display like the following appears.
Device Explanation
Mobile device “FP-E50 Audio” is added in the “My Devices” field
FP-E50
The “AUDIO” is shown
beside the Bluetooth
symbol
5. Press the [Exit] button on the FP-E50 a number of times
to return to the top screen .
This completes initial settings.
Connecting an Already-paired Mobile Device
1.
Turn on the Bluetooth function of the mobile device .
The FP-E50 and the mobile device are wirelessly connected.
MEMO
¹ If you were unable to establish a connection using the procedure above,
tap “FP-E50 Audio” that is displayed in the Bluetooth device screen of the
mobile device .
¹ After performing a factory reset on the FP-E50, delete the “FP-E50 Audio”
from your mobile device and then reinitialize the settings .
Playing Back Audio
1. Play back the music data on your mobile device .
The sound is heard from the FP-E50’s speakers.
MEMO
You can apply a “center cancel” effect to the audio while it plays back .
Adjusting the Volume of Bluetooth Audio
Normally you’ll adjust the volume on your mobile device.
If this does not provide the volume adjustment you want, you can adjust the
volume as follows.
1.
Press the [Menu] button .
The Menu screen appears.
2. Use the [ дд ] [ ее ] buttons to select “Input Volume”, and
then press the [Enter] button .
The Input Volume screen appears.
3.
Use the [ дд ] [ ее ] buttons to select “Bluetooth Input Vol .”
and use the [Dec] [Inc] buttons to adjust the volume .
Parameter Value Explanation
Bluetooth
Input Vol .
0–10
Adjusts the input level for
Bluetooth audio.
Pairing with More than One FP-E50
(Bluetooth ID)
If you want to pair more than one FP-E50 to your mobile device, such
as when in a music classroom, set the Bluetooth ID (which identifies
each unit) of each FP-E50 to a different ID, so that you can pair with
the desired FP-E50.
* When using these settings, the device name is shown on the
mobile device with the ID number appended (example: “FP-E50
Audio 1”).
1. Press the [Menu] button .
The Menu screen appears.
Playing Music through the Piano’s Speakers (Bluetooth Function)