Roland FP-E50 88-Key Portable Digital Piano - Manual (Page 5)

5 5
Placing the FP-E50 on a Stand
Be careful not to pinch your fingers when setting up the stand.
Please use one of the following Roland stands to support your FP-E50: KSFE50, KS-10Z, KS-12 or KS-20X.
Refer to the following when using a stand.
KSFE50
Refer to the KSFE50 Owner’s Manual.
KS-10Z
KS-12
KS-20X
Getting Ready to Play
Adjust the horizontal width of the stand
so that the rubber feet on the keyboard
side of the FP-E50 fit into the holes that
are provided to accommodate them.
Top view
Adjust the horizontal width
NOTE
For safety, do not use the stand in its very
highest adjustment position.
NOTE
Set the stand height to the second lowest
setting.
Align the center of the piano with the center of the stand.
Align the front of the piano
with the front of the stand
Adjust the width of the stand so that
the rubber feet of the piano straddle
the stand
Top view
Adjust the horizontal width
NOTE
For safety, do not use the stand in its very
highest adjustment position.
Align the front of the piano
with the front of the stand