Roland FP-E50 88-Key Portable Digital Piano - Manual (Page 42)

Using the Chord Sequencer
42 42
Clear (Clear Measure)
This erases (clears) the measures in the selected range.
Item
[ д ] [ е ] buttons
Value
[Dec] [Inc] buttons
Explanation
Start Position
Max. number of
measures from
pattern 1 to the
current pattern
Specifies the range of measures to
erase.
When this is executed, the
measures from the start position to
the end position are erased. End Position
Max. number of
measures from
pattern 1 to the
current pattern
Target
Chord,
Variation, All
Selects what to erase.
Cut (Cut Measure)
This cuts the measures in the selected range.
Item
[ д ] [ е ] buttons
Value
[Dec] [Inc] buttons
Explanation
Start Position
Max. number of
measures from
pattern 1 to the
current pattern
Specifies the range of measures
to cut.
When this is executed, the
measures from the start position to
the end position are cut. End Position
Max. number of
measures from
pattern 1 to the
current pattern
Copy (Copy Measure)
This copies the measures in the selected range.
Item
[ д ] [ е ] buttons
Value
[Dec] [Inc] buttons
Explanation
Start Position
Max. number of
measures from
pattern 1 to the
current pattern
Specifies the range of measures to
copy.
When this is executed, the
measures from the start position to
the end position are copied. End Position
Max. number of
measures from
pattern 1 to the
current pattern
Paste (Paste Measure)
This pastes the measures that you cut/copied into the specified position.
The number of measures that are inserted or overwritten depend on how
many measures you cut or copied.
Item
[ д ] [ е ] buttons
Value
[Dec] [Inc] buttons
Explanation
Paste Position 1–Last
Specifies where to paste the
measures.
Paste Mode
Insert
The measures that you cut/copied
are inserted at the paste position,
and all following measures are
moved after the newly inserted
measures.
Overwrite
The measures that you cut/copied
are pasted at the paste position,
overwriting the contents. Any
existing data is lost.
Repeat Count 1, 2, 3, –63, 64
Sets how many times to repeat the
paste operation.
For instance, when you insert four
measures that you cut/copied with
the Repeat Count set to “2”, the
four measures are pasted twice
(eight measures total).
3. Use the [ дд ] [ ее ] buttons to select “EXECUTE”, and then
press the [Enter] button .
4. Press the [Exit] button to return to the previous screen .
Undoing an Editing Operation (Undo/Redo)
Here’s how to cancel the result of an editing operation and return to
the state before that operation was executed (Undo).
You can also cancel the Undo operation (Redo).
MEMO
The Edit Menu shows the commands for which “Undo” or “Redo”
applies. If neither operation is available, “Undo/Redo” appears in gray.
Undoing an editing operation (Undo)
1.
Press the [Exit] button on the edit screen to return to
the Edit Menu .
2.
On the Edit Menu, select “Undo” and then press the
[Enter] button .
Undoes the edit you just made and returns to the previous state.
Reverting an undo operation (Redo)
1. Right after you execute undo, select “Redo” on the Edit
Menu and press the [Enter] button .
The edit you just made is undone, and the data goes back to the way it was.
MEMO
Once you edit the data after an undo, the redo operation becomes
unavailable.