Input impedance setting (ch 1 and ch 2 only), Phantom power on/off – Roland OCTA-CAPTURE - High-Speed USB Audio Interface User Manual
Page 36
36
Input impedance setting (CH 1 and CH 2 only)
1 2
2
1
3 4
1.
Press the CHANNEL [
] or [
] button .
The CHANNEL [
] [
] buttons will light, and the preamp setting screen will appear.
2.
Use the CHANNEL [
] [
] buttons to select the channel that you want to adjust .
3.
Turn the [CURSOR/VALUE] knob to move the cursor to “Hi-Z .”
4.
Use the [CURSOR/VALUE] knob to change the setting .
Connect the microphone to the INPUT 1
Lo-Z (clear the check box)
Connect the guitar to the INPUT 2
Hi-Z (select the check box)
The sound will be momentarily muted when you switch the input impedance.
Phantom power on/off
If you’re using a condenser microphone, turn the phantom power switch on.
*
You must turn the phantom power switch off if you’ve connected a device that does not require
phantom power . Supplying phantom power to such a device will cause malfunctions .
2
1
2
3
1
1.
Press the CHANNEL [
] or [
] button .
The CHANNEL [
] [
] buttons will light, and the preamp setting screen will appear.
2.
Use the CHANNEL [
] [
] buttons to select the channel that you want to adjust .
3.
Press the [
] button .
When phantom power is turned on, the [
] button will light.