Roland OCTA-CAPTURE - High-Speed USB Audio Interface - Manual (Page 15)

15
Windows 7/Windows Vista Users
Installing the Driver
Steps to be performed on the OCTA-CAPTURE keyboard itself are marked by a
Operation of the OCTA-CAPTURE
symbol. Don’t connect the OCTA-CAPTURE to your computer
until you are told to do so.
* The example screen shots included here are taken from Windows 7 .
1. With the OCTA-CAPTURE disconnected, start up Windows .
Disconnect all USB cables from your computer, with the exception of those for a USB keyboard and
USB mouse (if used).
2. Close all currently running software .
3. Insert the included OCTA-CAPTURE CD-ROM into your DVD-ROM drive .
When the auto-play dialog box appears, click [Open folder to view files].
4. In the appropriate folder within the CD-ROM, double-click the [Setup] icon to start up
the installer .
OS Installer
Windows 7: Open the folders [Driver] and then [Win7]
Windows Vista: Open the folders [Driver] and then [Vista]
Windows 7 64-bit edition: Open the folders [x64Driver] and then [Win7]
Windows Vista 64-bit edition: Open the folders [x64Driver] and then [Vista]
If you get a message saying “The operating system you are using is not supported” or “The version
of this file is not compatible with the version of Windows you’re running,” or if you don’t know the
version of your operating system, check your operating system as described below.
If “System type” indicates “64-bit Operating System,” you have the 64-bit version.
Windows 7 users
Open “Control Panel,” click “System and Security,” and then click [System].
If the Control Panel shows the icon view, click [System] icon.
Windows Vista users
Open “Control Panel,” click [System and Maintenance], and then click [System].
If the Control Panel shows the classic view, double-click the “System” icon.