Nikon D5 - Manual (Page 95)

73
y
A
Metering Exposure and White Balance
The area used for metering exposure or auto white balance when
photographs are recorded at a movie frame size of 1920 × 1080 crop
(
0 67) is not the same as the area in the final photograph, with the
result that optimal results may not be achieved. Take test shots and
check the results in the monitor.
A
Wireless Remote Controllers and Remote Cords
If Record movies is selected for Custom Setting g1 (Custom control
assignment) > Shutter-release button (
0 309), the shutter-release
buttons on optional wireless remote controllers and remote cords
(
0 337, 339) can be used to start live view and to start and end movie
recording.
D
Recording Movies
Movies are recorded in the sRGB color space. Flicker, banding, or
distortion may be visible in the monitor and in the final movie under
fluorescent, mercury vapor, or sodium lamps or if the camera is panned
horizontally or an object moves at high speed through frame (for
information on reducing flicker and banding, see Flicker reduction,
0 298). Flicker may also appear while power aperture is in use. Jagged
edges, color fringing, moiré, and bright spots may also appear. Bright
bands may appear in some areas of the frame with flashing signs and
other intermittent light sources or if the subject is briefly illuminated by
a strobe or other bright, momentary light source. When recording
movies, avoid pointing the camera at the sun or other strong light
sources. Failure to observe this precaution could result in damage to
the camera’s internal circuitry. Note that noise (randomly-spaced bright
pixels, fog, or lines) and unexpected colors may appear if you zoom in
on the view through the lens (
0 47) in movie mode.
Flash lighting can not be used.
Recording ends automatically if the lens is removed or the live view
selector is rotated to a new setting.