ProSoft Technology RLX2-IFH9E - Manual (Page 94)

Dialog Boxes ControlScape ♦ RadioLinx
User Manual RadioLinx® ControlScape FH
Page 94 of 132 ProSoft Technology, Inc.
March 16, 2011
8.11 Automatic Baud Detection Dialog Box
If ControlScape is unable to open the COM port on the configuration PC, you will
be prompted to check the port configuration (page 11). The Automatic Baud
Detection dialog box opens when you click Yes on the message box prompt "The
connected radio is not responding. Do you want to attempt an automatic baud
rate detection sequence?"
ControlScape will attempt to open the port using all available combinations of
baud rate, data bits, parity and stop bits. This procedure may take several
minutes; if you know the correct settings for your COM port, click Cancel, and
then use the Serial Settings dialog box to configure the port.