ProSoft Technology RLX2-IFH9E User Manual
Page 36
Network Configuration
ControlScape ♦ RadioLinx
User Manual
RadioLinx® ControlScape FH
Page 36 of 132
ProSoft Technology, Inc.
March 16, 2011
Password Confirm
If the password is valid and not blank, you will be prompted to confirm the
password.
This dialog box is used to confirm the password that is used to access Network
Configuration through the ControlScape Setup and Diagnostics Software. Make
sure to remember the password used. After it is entered, the configuration cannot
be accessed without it. If it is forgotten, a new Network (page 75) will have to be
defined and the old network Deleted (page 48).
Password Mismatch
The Password Mismatch dialog box appears when the value entered in the
Confirm Password field is not the same as the value entered in the Configuration
File Password field of the Network Properties.
Click OK
to return to the Confirm Network Configuration Password dialog box.
Then re-enter the password and click OK
again.