ProSoft Technology RLX2-IFH9E - Manual (Page 50)

Existing Network Maintenance ControlScape ♦ RadioLinx
User Manual RadioLinx® ControlScape FH
Page 50 of 132 ProSoft Technology, Inc.
March 16, 2011
5.4 Change a Network's Channel
For Transparent, Dialup Modem Emulation and Ethernet Protocols, from the
Graphical Layout Screen (page 20) of an existing network, select:
Properties
o
Radio Network
The Networks Properties dialog box will then display.
Important: The items on this dialog box depend on what type of radio you select. The following
example shows a network of RadioLinx IFHS (Industrial Frequency Hopping Serial) radios. Refer to
the user manual for your radio for an explanation of each configuration item.
Select an unused Network Channel from the drop-down list.
Refer to the user manual for your radio for an explanation of other configuration
items on this dialog box.
Note: Some fields are "grayed-out" in this dialog box because these parameters cannot be
changed from here.
Note: See When to Re-Configure Radios (page 43) to ensure all radios will be updated.