ProSoft Technology RLX2-IFH9E - Manual (Page 13)

ControlScape ♦ RadioLinx Serial Port Settings
RadioLinx® ControlScape FH User Manual
ProSoft Technology, Inc. Page 13 of 132
March 16, 2011
2.2 Configuring the Serial Port
These are the default serial port parameters for the Configuration PC:
Generally, these default settings should not be changed:
Baud rate: 115200 (default)
Parity: None (default)
Data Bits: 8 (default)
Stop Bits: 1 (default)
Do NOT change the "Handshaking" settings:
Select the COM port from the drop-down list. The COM port refers to the
hardware connectors that allow the computer to communicate with other devices
(for example, a printer or a RadioLinx radio) through cables. COM ports are
usually located in the back of the computer.
The RadioLinx ControlScape FH Setup Application automatically determines and
displays the serial ports.
To detect the identity of each COM port:
Look for a COM port label near the serial port connector on the back of the
PC
Refer to the computer's documentation
Check (and/or adjust) the PC's BIOS settings
Experiment, trial-and-error
In general, the defaults will not have to be changed.
Click OK to accept the current settings.
See Serial Port Defaults (page 14) for an illustration of the default serial port
settings.