ProSoft Technology RLX2-IFH9E - Manual (Page 30)

Network Configuration ControlScape ♦ RadioLinx
User Manual RadioLinx® ControlScape FH
Page 30 of 132 ProSoft Technology, Inc.
March 16, 2011
3.9 Change a Radio's Type
When radios are first added to a network, they are added as a Remote Radio or
a Repeater Radio. However, it is easy to change the radio type after a radio has
been added to the network. To change the radio's type, open its configuration
dialog.
There are two different methods to access the Radio Configuration dialog box;
double-click the radio's icon,
OR
select the radio's icon by selecting it with a single left-click of the mouse and
then choose the following menu items:
o
Properties / Radio
Click on the Advanced>> button to show the Radio Network Settings.
In the Radio Network Settings is a check box "Use this radio as a Repeater". If
this box is checked, the radio will be act as a Repeater. If it is unchecked it will
not.
Important: The items on this dialog box depend on what type of radio you select. The following
example shows a RadioLinx IFHS (Industrial Frequency Hopping Serial) radio. Refer to the user
manual for your radio for an explanation of each configuration item.