ProSoft Technology MVI56E-MNETR - Manual (Page 96)

MVI56E-MNETR ♦ ControlLogix Platform Diagnostics and Troubleshooting
Modbus TCP/IP Interface Module with Reduced Data Block User Manual
Page 96 of 153
ProSoft Technology, Inc.
August 31, 2009
To begin the display of the communications data, start the Data Analyzer. When
the Data Analyzer is running, you should see something like this.
The means that the module is transitioning the communications line to a
transmit state.
All characters shown in <> brackets are characters being sent out by the module.
The shows when the module is done transmitting data, and is now ready to
receive information back.
And finally, all characters shown in the [ ] brackets is information being received
from another device by the module.
After taking a minute or two of traffic capture, stop the Data Analyzer.