ProSoft Technology MVI56E-MNETR - Manual (Page 58)

MVI56E-MNETR ♦ ControlLogix Platform Configuring the MVI56E-MNETR Module
Modbus TCP/IP Interface Module with Reduced Data Block User Manual
Page 58 of 153
ProSoft Technology, Inc.
August 31, 2009
Command Entry Formats
The following table shows the structure of the configuration data necessary for
each of the supported commands.
Column
# 1 2 3 4 5 6 7 8 9 10
Function
Code Enable
Code Internal
Address Poll
Interval
Time Count Swap
Code
IP
Address Serv
Port Slave
Node Function
Code Device
Modbus
Address
fc1 Code Register
(bit) 1/10th
Seconds Bit
Count 0 IP
Address
Port # Address Read Coil
(0x)
Register
fc2 Code Register
(bit) 1/10th
Seconds Bit
Count 0 IP
Address
Port # Address Read Input
(1x)
Register
fc3 Code Register 1/10th
Seconds Word
Count Code IP
Address
Port # Address Read Holding
Registers
(4x)
Register
fc4 Code Register 1/10th
Seconds Word
Count 0 IP
Address
Port # Address Read Input
Registers
(3x)
Register
fc5 Code 1 bit 1/10th
Seconds
Bit
Count 0 IP
Address
Port # Address Force (Write)
Single Coil
(0x)
Register
fc6 Code 1 bit 1/10th
Seconds
Word
Count 0 IP
Address
Port # Address Preset (Write)
Single
Register (4x)
Register
fc15 Code Register
(bit) 1/10th
Seconds Bit
Count 0 IP
Address
Port # Address Force (Write)
Multiple Coil
(0x)
Register
fc16 Code Register 1/10th
Seconds Word
Count 0 IP
Address
Port # Address Preset (Write)
Multiple
Register (4x)
Register
The first part of the record is the module Information, which relates to the
MVI56E module and the second part contains information required to interface to
the Server device.