ProSoft Technology MVI56E-MNETR - Manual (Page 92)

MVI56E-MNETR ♦ ControlLogix Platform Diagnostics and Troubleshooting
Modbus TCP/IP Interface Module with Reduced Data Block User Manual
Page 92 of 153
ProSoft Technology, Inc.
August 31, 2009
4.6 Monitoring MNET Client Information
Use the MNET C LIENT I NFORMATION menu to view the configuration and status
information for the MNET Client.
4.6.1 Command List
Use the C OMMAND L IST menu to view the command list settings for MNET Client
0. The information on this menu corresponds with the settings in the [MNET
Client 0 Commands] settings in ProSoft Configuration Builder (page 57).
Use the scroll bar on the right edge of the window to view each MNET Client
command.
4.6.2 Command Status
Use the C OMMAND S TATUS menu to view MNET Client 0 Command status.
A zero indicates no error.
A non-zero value indicates an error. Refer to Error Codes for an explanation of
each value.
4.6.3 Config
Use the C ONFIGURATION menu to view configuration settings for MNET Client 0.
The information on this menu corresponds with the configuration information in
the [MNET Client 0] settings in ProSoft Configuration Builder (page 55).
4.6.4 Status
Use the S TATUS menu to view status for MNET Client 0. During normal operation,
the number of requests and responses should increment, while the number of
errors should not change.