ProSoft Technology MVI56E-MNETR - Manual (Page 28)

MVI56E-MNETR ♦ ControlLogix Platform Start Here
Modbus TCP/IP Interface Module with Reduced Data Block User Manual
Page 28 of 153
ProSoft Technology, Inc.
August 31, 2009
3 Name the ENBT/A module, then set the IP Address and slot location in the
local rack with the ControlLogix processor.
4 Click OK.
5 Next, select the 1756-ENBT module that you just created in the Controller
Organization pane and click the right mouse button to open a shortcut menu.
On the shortcut menu, choose N
EW M ODULE .
6 Repeat steps 2 and 3 to add the second EtherNet/IP module to the remote
rack.