ProSoft Technology MVI56E-MNETR - Manual (Page 102)

MVI56E-MNETR ♦ ControlLogix Platform Reference
Modbus TCP/IP Interface Module with Reduced Data Block User Manual
Page 102 of 153
ProSoft Technology, Inc.
August 31, 2009
ƒ Internal web server provides access to product documentation, module
status, diagnostics, and firmware updates
ƒ 4-character alpha-numeric scrolling LED display of status and diagnostics
data in plain English – no cryptic error or alarm codes to decipher
ƒ ProSoft Discovery Service (PDS) software used to locate the module on the
network and assign temporary IP address
ƒ Personality Module - a non-volatile, industrial-grade Compact Flash (CF)card
used to store network and module configuration, allowing quick in-the-field
product replacement by transferring the CF card
5.1.2 Functional Specifications
ƒ The MVI56E-MNETR transfers data in small I/O blocks than the MVI56E-
MNET, which makes it ideal for installations in remote racks or where
bandwidth is limited.
ƒ Works well with redundant ControlLogix Programmable Automation
Controllers (PACs) using ControlNet.
ƒ Module appears to the ControlLogix processor as an input/output (I/O)
module
ƒ 40-word scheduled I/O image blocks used for data transfers require
significantly less bandwidth than the MVI56E-MNET
ƒ Retrieving module status and executing special functions (command control,
event commands, etc.) are supported in ladder logic by special block transfer
codes
5.1.3 Hardware Specifications
Specification Description
Backplane Current Load 800 mA @ 5 V DC
3 mA @ 24V DC
Operating Temperature 0° to 60°C (32° to 140°F)
Storage Temperature -40° to 85°C (-40° to 185°F)
Shock 30g Operational
50g non-operational
Vibration: 5 g from 10 to 150 Hz
Relative Humidity 5% to 95% (non-condensing)
LED Indicators Battery Status (ERR)
Application Status (APP)
Module Status (OK)
4-Character, Scrolling, Alpha-Numeric
LED Display Shows Module, Version, IP, Application Port Setting, Port
Status, and Error Information
Debug/Configuration/Application Ethernet port (E1)
Ethernet Port 10/100 Base-T, RJ45 Connector, for CAT5 cable
Link and Activity LED indicators
Auto-crossover cable detection
Shipped with Unit 5-foot Ethernet straight-through cable