ProSoft Technology MVI56E-MNETR - Manual (Page 93)

Diagnostics and Troubleshooting MVI56E-MNETR ♦ ControlLogix Platform
User Manual Modbus TCP/IP Interface Module with Reduced Data Block
ProSoft Technology, Inc.
Page 93 of 153
August 31, 2009
4.7 Monitoring MNET Server Information
Use the MNET S ERVER I NFORMATION menu to view the configuration and status
information for the MNET Server.
4.7.1 Config
Use the C ONFIGURATION menu to view configuration settings for MNET Servers
connected to the MNET Client.
The information on this menu corresponds with the configuration information in
the [MNET Servers] settings in ProSoft Configuration Builder (page 63).
4.7.2 Status
Use the S TATUS menu to view the status of each MNET Server connected to the
MNET Client 0. During normal operation, the number of requests and responses
should increment, while the number of errors should not change.
4.8 Data Analyzer
The Data Analyzer mode allows you to view all bytes of data transferred on each
port. Both the transmitted and received data bytes are displayed. Use of this
feature is limited without a thorough understanding of the protocol.
4.8.1 Configuring the Data Analyzer
Select Timing Interval
Time Ticks help you visualize how much data is transmitted on the port for a
specified interval. Select the interval to display, or choose No Ticks to turn off
timing marks.
Select the Communication Port to Analyze
You can view incoming and outgoing data for one application port at a time.
Choose the application port to analyze.
Select the Data Format
You can view incoming and outgoing data in Hexadecimal (HEX) or
Alphanumeric (ASCII) format.