ProSoft Technology MVI56E-MNETR - Manual (Page 67)

Configuring the MVI56E-MNETR Module MVI56E-MNETR ♦ ControlLogix Platform
User Manual Modbus TCP/IP Interface Module with Reduced Data Block
ProSoft Technology, Inc.
Page 67 of 153
August 31, 2009
2.2 Download the Project to the Module
In order for the module to use the settings you configured, you must download
(copy) the updated Project file from your PC to the module.
1 In the tree view in ProSoft Configuration Builder, click once to select the
MVI56E-MNETR module.
2 Open the P ROJECT menu, and then choose M ODULE / D OWNLOAD .
This action opens the D OWNLOAD dialog box. Notice that the Ethernet
address field contains the temporary IP address you assigned in the previous
step. ProSoft Configuration Builder will use this temporary IP address to
connect to the module.
Click T EST C ONNECTION to verify that the temporary IP address is correct.
3 If the connection succeeds, click D OWNLOAD to transfer the Ethernet
configuration to the module.
If the Test Connection procedure fails, you will see an error message. To correct
the error, follow these steps.
1 Click OK to dismiss the error message.