PLANET UMG-2000 - Manual (Page 58)

58
8.2 IP PBX Call Setting
Click the “Setting” tab in the “VoIP” screen. The VoIP “Setting” screen appears, allowing the
administrator to manage the IP PBX services and features. The IP PBX service and call
features can be globally or individually enabled or disabled.
CALL FEATURE SETTING
This section lists all the available setting of IP PBX. The IP PBX service is accessible only
when the VoIP service is enabled.
PBX Service: Enables or disables the IP PBX service
Call Forwarding: Enables or disables the feature “Call Forwarding”. Enabling
this feature will allow the user in the UMG-2000 Series to forward the
incoming calls to another telephone. The call forwarding extension number
can only be set by the individual user in the personal account web
administration.(Refer to Section - Personal Account Web Administration )
Call Pickup: Enables or disables the feature “Call Pickup”. Enabling this feature
will allow answering an incoming call to the specific extension from
another phone within the same call pick up group.
Call Parking: Enables or disables the feature “Call Parking”. Enabling this
feature will allow parking an incoming call and pick up it at another
location.
Do Not Disturb: Enables or disables the feature “Do Not Disturb”. Enabling this
feature will prevent ringing of the incoming call.
LCR: When enable this option, the LCR function just could be used.