PLANET UMG-2000 User Manual
Page 113
113
*** Use VIP-880 to register to UMG-2000：
Step1. Configuration VoIP Setting register to UMG-2000：
(1) Go to “VoIP Basic” page, and “VoIP Protocol Setting” select “SIP”.
(2) Choose the FXS/FXO Port you want to register to UMG-2000.
Key-in the UMG-2000 extension number and password.
(the default extension password same as extension number)
Example. We used the FXS/Port 5 to register to UMG-2000 “5000” extension number.
We used the FXO/Port 6 to register to UMG-2000 “5003” extension number.
(3)Go to the below of page, please key-in your UMG-2000 IP-Address for connect to SIP
Server.
Domain/Realm：UMG-2000 IP-Address or Domain name.
Sip Proxy Server：UMG-2000 IP-Address
SIP Authentication：Select “Enable”
Local SIP Port：5060
When setting is complete, please press the “Apply” button on the below of page, then click
the “Save Configuration” on the above of page to save setting.