PLANET UMG-2000 - Manual (Page 45)

45
WIRELESS NETWORK
This section lists all the current settings of the wireless Access Point (AP).
Access Point: Displays the wireless AP service state, enabled or disabled.
Hide SSID: Displays the visibility of the wireless AP SSID.
Network Name (SSID): Displays the SSID of this wireless network.
Wireless Mode: Displays the wireless AP supporting mode.
Wireless Region: Displays the region that the wireless AP belongs to.
Channel: Displays the current channel configuration mode: auto or channel
number
Authentication type: Displays the current wireless AP security access type.
Link speed: Displays the wireless AP link speed.
Data Encryption Type: Displays the type of data encryption.
Encrypt Strength: Displays the encrypt strength if WEP is the data encryption
type.
Security Key: Displays the key for the clients to access this AP if WEP is the
data encryption type.
6.2 Wireless Setting
The wireless “Setting” screen enables the administrator to manage the wireless AP.
WIRELESS NETWORK
This section lists all the available settings to the wireless Access Point (AP). Service is only
accessible when enabled. SSID is visible and can be scanned only when “Hide SSID” is
disabled.
Access Point: Enables or disables the wireless AP service.
Hide SSID: Specifies whether the wireless AP SSID is visible or not.
Network Name (SSID): An SSID is the name of a wireless local area network
(WLAN). Specifies the preferred SSID name string.
Wireless Region: Specifies the region that the wireless AP belongs to. The
region will affect the channels and the working frequency of your AP.
Wireless Mode: Specifies the preferred wireless AP mode.
Channel: Specifies a preferred wireless channel number or an auto channel.
Authentication Type: Specifies the authentication type.
Data Encryption: Specifies the type of Data Encrypt.
Encrypt Strength: Specifies the encrypt strength if WEP is the data encryption
type.