PLANET UMG-2000 - Manual (Page 31)

31
Step 4: Setting the Wireless Network
This page allows the administrator to quickly setup the wireless Access Point (AP). Specify
the wireless configuration and then click the button “Next” to go to step 5.
Item Description
Access Point (AP) Enable or disable the wireless AP service.
Hide SSID Decide whether or not to make the wireless AP SSID visible.
Network Name (SSID) Specify the preferred SSID name string.
Wireless Region
Select the area of location yours.
Wireless Mode
Select the preferred wireless AP mode:
802.11b / 802.11g / 802.11n.
Channel Select the preferred wireless channel number.
Authentication Type
Specify the authentication type:
Open system / Shared Key / WPA / WPA2.
Data Encryption Select the Data Encrypt type.
Encrypt Strength Select the encrypt strength.
Security Key Specify the key for the clients to access this AP.