PLANET UMG-2000 User Manual
Page 107
107
*** Use ATA-150 to register to UMG-2000：
Step1.Connecting Telephone：
Using a telephone cable, connect your telephone to the Phone port of the Phone Adapter.
Step2. Connecting Network and Power AC Power：
Connect the included Ethernet network cable to the LAN port of the Phone Adapter.
Connect the included power adapter to the POWER port of the Phone Adapter.
The PWR, LNK/ACT, and RING LEDs will be solidly lit when the Phone Adapter is ready for
use.
Step3. Basic Configuration & Administration Interface：
Using for soft utility to search SIP ATA from current network.
The utility not only easy-to-use and provides user more convenience for configuration
access.
At the some time if you forget this IP address can also found that via the utility.
Please download the “SmartDiscoveryLite_v10.rar” at our FTP Server：
ftp://surve_guest:[email protected]/SmartDiscoveryLite_v10.rar
To press “Refresh” the button to show out the SIP ATA, then click IP Address item and
press the “Connect to Device” button.
Step4. Login to your ATA-150 Web-UI：
You will connect to SIP ATA via your web browser automatically.
ATA will prompt for logon username/ password, please enter: admin / 123 to continue
machine administration.