PLANET WDRT-1200AC - Manual (Page 83)

User Manual of WDRT-1200AC
-77-
The login timeout option allows you to set the period of time that
you can be logged into the Router's advanced setup interface. The
timer starts when there has been no activity. For example, you
have made some changes in the advanced setup interface, then
leave your computer alone without clicking "Logout". Assuming the
timeout is set to 10 minutes, then 10 minutes is the timeout after
you leave, meaning the login session will expire. You will have to
login to the router again to make any more changes. The login
timeout option is for security purposes and the default is set to 10
minutes. As a note, only one computer can be logged into the
Routers advanced setup interface at one time.
For security, you are suggested to change the initial username and password for
the administrator. If you forget the password, please reset the router. The default
username and password are both admin.
 Time and Time Zone
The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the
Router to synchronize the system clock to the global Internet. The synchronized clock in the Router is used to
record the security log and control client filtering.
Step 1. Select the time zone that you reside in.
Step 2. If you reside in an area that observes Daylight Saving, then place a checkmark in the box next to
"Automatically Adjust Daylight Savings".
Allow at least 15 minutes for the router to contact the time servers on the Internet and get a response.
1. The system clock may not update immediately.
2. You cannot set the clock yourself.