PLANET WDRT-1200AC - Manual (Page 35)

User Manual of WDRT-1200AC
-29-
account information. You don’t need to configure any settings for
this connection.
 Static IP Address:
If your ISP offers you static IP Internet connection type, select
“Static IP" from corresponding drop-down menu and then enter IP
address, subnet mask, primary DNS and secondary DNS
information provided by your ISP in the corresponding fields.
 PPPoE:
Select PPPoE, if your ISP is using a PPPoE connection and provide
you with PPPoE user name and password info.
WAN IP, whether obtained automatically or specified manually, should NOT be on
the same IP net segment as the LAN IP; otherwise, the router will not work
properly. In case of emergency, press the hardware "Reset" button.
 DHCP
Select this option to let the router obtain IP settings automatically from your ISP, if your ISP does not give you
any IP information or account information. You don’t need to configure any settings for this connection.
Figure 5-2-3
DO NOT change the factory default MTU value unless necessary as an improper
MTU value may degrade your network performance or even lead to network
malfunction.
 Static IP Address
If your ISP offers you static IP Internet connection type, select “Static IP" from corresponding drop-down menu
and then enter IP address, subnet mask, primary DNS and secondary DNS information provided by your ISP in
the corresponding fields.