PLANET WDRT-1200AC - Manual (Page 27)

User Manual of WDRT-1200AC
-21-
3. Open a command prompt, and type ping 192.168.1.1, and then press Enter.
 If the result displayed is similar to Figure 4-7 , it means the connection between your PC and the
Router has been established well.
Figure 4-7 Successful Ping Command
 If the result displayed is similar to Figure 4-8 , it means the connection between your PC and the
Router has failed.
Figure 4-8 Failed Ping Command
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some
firewall software programs may block a DHCP request on newly installed adapters.