PLANET WDRT-1200AC - Manual (Page 72)

User Manual of WDRT-1200AC
-66-
Figure 5-6-10
The page includes the following fields:
Object Description
 Service Name: Enable or disable Port Triggering function.
 Service User:
You may select Any or Single Address.
Any: All users in the network are allowed to use the service.
Single Address: Input the NIC IP address of the PC to limit the
service to this NIC.
 Service Type:
Choose a protocol used on the triggering port. You may choose
TCP/UDP, TCP or UDP.
 Triggering Starting Port: Set a port on which connection is initiated.
 Triggering Ending Port: Set an ending trigger port.
 Connection Type: Choose a trigger protocol from TCP&UDP, TCP and UDP.
 Starting Port:
When an open port is opened after connection is initiated at the
trigger port, connection can be initiated at the open port.
 Ending Port: Set an ending triggered port.