PLANET WDRT-1200AC - Manual (Page 39)

User Manual of WDRT-1200AC
-33-
5.3 Network Setup
5.3.1 LAN Setup
Click “Network Setup”  “LAN Setup” and the following page will be displayed.
Figure 5-3-1 LAN Setup
The page includes the following fields:
Object Description
 IP Address:
Router’s LAN IP.
The default is 192.168.1.1. You can change it according to your
needs.
 Subnet Mask: Router’s LAN subnet mask.
 Use Router as DHCP
Server:
If it is selected, the router serves as the DHCP server and
automatically assigns IP addresses for all computers in the LAN.
 IP Pool Starting Address: The start IP address of all the available successive IPs.
 IP Pool Ending Address: The end IP address of all the available successive IPs.
 Lease Time:
Select the time for using one assigned IP from the dropdown list.
After the lease time, the AP automatically assigns new IP addresses
to all connected computers.
 Local Domain Name: Set the domain name of the server.
 Address Reservation: Select Add to enable DHCP Reserved Address service.