PLANET WDRT-1200AC - Manual (Page 53)

User Manual of WDRT-1200AC
-47-
wireless network with this SSID.
 Enable Wireless
Isolation:
Enable or disable Wireless Isolation function.
 Enable Broadcom WMF: When this function is enabled, wireless multicast will be more fluent.
 Guest Wireless Network
Name (SSID):
Set a name (SSID) for your wireless network. User can access the
wireless network through it only. However, if you switch to Client
Mode, this field becomes the SSID of the AP you want to connect
with.
 Security Options:
Select the security mode from the Security Options dropdown list.
There are 5 options in the Security Mode dropdown list:
 None
 WEP
 WPA-PSK[TKIP]
 WPA2-PSK[AES]
 WPA-PSK[TKIP]+WPA2-PSK[AES]
5.4.4 Advanced Setup
On this page, you can configure the 2.4G and 5G wireless advanced parameters. It is recommended to use the
default parameters.
Figure 5-4-5 Advanced Setup