PLANET WGSD-10020HP - Manual (Page 317)

User’s Manual of WGSD-10020 Series
stops working and without response, the WGSD-10020HP PoE Switch is going to restart PoE port power, and bring the PD back
to work. It will greatly enhance the reliability and reduces administrator management burden.
This page provides you with how to configure PD Alive Check.The screen in Figure 4-16-9 appears.
Figure 4-16-9: PD Alive Check Configuration Screenshot
The page includes the following fields:
Object Description
 Mode Allows user to enable or disable per port PD Alive Check function as default value of
all ports is disabled.
 Ping PD IP Address This coulumn allows user to set PoE device IP address here for system making ping
to the PoE device. Please note that the PD’s IP address must be set to the same
network segment as the WGSD-10020HP PoE Switch.
 Interval Time (10~300s) This column allows user to set how long system should issue a ping request to PD to
detecte whether PD is alive or dead. Interval time range is from 10 seconds to 300
seconds.
 Retry Count (1~5) This column allows user to set how many times system retries ping to PD.
317